Procore logoNetwork

Design and Engineering Contractors in Stem, NC

3,452 Results within

Architectural Design and Engineering
Civil Design and Engineering
Design and Engineering
Detention Security Systems
Direct Applied Finish Systems
Electrical Design and Engineering
Exterior Insulation and Finish Systems Eifs
Fire Protection Engineering
Information Management and Presentation
Integrated Automation Actuators and Operators
Integrated Automation Battery Monitors
Integrated Automation Compressed Air Supply
Integrated Automation Control and Monitoring Network
Integrated Automation Control Dampers
Integrated Automation Control Valves
Integrated Automation Current Sensors
Integrated Automation Kw Transducers
Integrated Automation Lighting Relays
Integrated Automation Local Control Units
Integrated Automation Network Devices
Integrated Automation Network Gateways
Integrated Automation Power Meters
Integrated Automation Sensors and Transmitters
Integrated Automation Software
Integrated Automation Systems For Communications
Integrated Automation Systems For Conveying Equipment
Integrated Automation Systems For Electrical
Integrated Automation Systems For Electronic Safety
Integrated Automation Systems For Electronic Security
Integrated Automation Systems For Facility Equipment
Integrated Automation Systems For Fire Suppression
Integrated Automation Systems For HVAC
Integrated Automation Systems For Network Equipment
Integrated Automation Systems For Plumbing
Integrated Automation Ups Monitors
Interior Design
Landscape Design and Engineering
Mechanical Design and Engineering
Polymer Based Exterior Insulation and Finish System
Polymer Modified Exterior Insulation and Finish System
Specialized Systems
Structural Design and Engineering
Technology Design and Engineering
Water Drainage Exterior Insulation and Finish System
Clear All Filters
Market Sector
Company Type
Business Classification
Trades and Services (44)
Company Logo

Ballinger

DC, DC • Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer
Commercial, Healthcare, Industrial and Energy, Institutional
Architectural Design and Engineering, Assessments and Studies, Design and Engineering, Electrical Design and Engineering, Fire Protection Engineering, Interior Design, Mechanical Design and Engineering, Plumbing Utilities Distribution, Structural Design and Engineering, Technology Design and Engineering
We are nationally recognized leaders in academic, research, healthcare, and corporate planning and design. Building on a strong legacy of innovation, Ballinger is committed to the thoughtful integration of technology, a deep knowledge of our building types, and exceptional client service. Ballinger was one of the first firms in the country to merge the disciplines of architecture and engineering into a professional practice. Our single office in Philadelphia houses a staff of over 200 people, comprising of three architectural studios, two multi-disciplinary engineering studios, and an interiors studio. We take pride in designing elegant places that contribute to the intellectual enrichment, research discovery, and medical advancements that drive our economies, and we diligently push for solutions that tread lightly on our environment. Our work has been celebrated and recognized with numerous regional and national awards and publications. Located in a single office, our integrated teams are led by principals who actively participate in the design and delivery of the work of the practice. Our desire to create buildings of ideas, craft, and innovation is reinforced by our strength of expertise and commitment to quality.
Company Logo

Allen & Hoshall, Inc.

Alabama • Arkansas • Florida • Georgia • Kentucky • Louisiana • Mississippi • Missouri • New Jersey • North Carolina • South Carolina • Tennessee
Architect, Engineer
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Architectural Design and Engineering, Civil Design and Engineering, Electrical Design and Engineering, Mechanical Design and Engineering, Structural Design and Engineering, Surveying
Allen & Hoshall, Inc. is a Architect, Engineer that serves the Memphis, TN area and specializes in Structural Design and Engineering, Electrical Design and Engineering, Civil Design and Engineering, Surveying, Architectural Design and Engineering, Mechanical Design and Engineering.
Company Logo

G7 Automation

Colorado • Connecticut • Delaware • Florida • Georgia • Maryland • Massachusetts • New Hampshire • New Jersey • New York • North Carolina • Ohio • Pennsylvania • Rhode Island • South Carolina • Texas • Vermont • Virginia
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Design and Engineering, Instrumentation and Control For Electrical Systems, Instrumentation and Control For Process Systems, Integrated Automation Control Valves, Integrated Automation Software, Integrated Automation Systems For HVAC, Technology Design and Engineering
G7 Automation engineers and deploys modern control technology to ensure optimal performance of a plant/process.  Our robust automation solutions maximize the ROI of, not only, the control dollar but by leveraging our application expertise we create more attractive ROI for required infrastructure spending across the board.  We achieve these results through a disciplined engineering approach to every challenge and by being a true partner to the clients we service.  We will not settle until we’ve met or exceeded our customers user requirements in every detail.
Company Logo

Denham-Blythe Company, Inc.

Alabama • Arkansas • California • Florida • Georgia • Illinois • Indiana • Kansas • Kentucky • Louisiana • Michigan • Mississippi • Missouri • New Jersey • New York • North Carolina • Ohio • Oklahoma • Pennsylvania • Rhode Island • South Carolina • Tennessee • Texas • Virginia • West Virginia • Wisconsin
Architect, Engineer, General Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
3d Capture Scanning, Architectural Design and Engineering, Civil Design and Engineering, Concrete, Design and Engineering, Electrical Design and Engineering, Mechanical Design and Engineering, Structural Design and Engineering
Denham Blythe Company is an Architect, Engineer, General Contractor with in house design staff for civil, structural, architectural, mechanical, and electrical design that serves the Eastern US and specializes in Design and Engineering, Project Management and Coordination.
Company Logo

Ayoroa Simmons and AIM3D

Alabama • Arkansas • Delaware • District of Columbia • Florida • Georgia • Indiana • Kentucky • Louisiana • Maryland • Mississippi • New Jersey • New York • North Carolina • Ohio • Pennsylvania • South Carolina • Tennessee • Virginia • West Virginia
Architect, Engineer
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Architectural Design and Engineering, Bim and Model Making Services, Electrical Design and Engineering, Instrumentation and Control For Electrical Systems, Instrumentation and Control For HVAC, Integrated Automation Local Control Units, Integrated Automation Systems For Conveying Equipment, Integrated Automation Systems For HVAC, Mechanical Design and Engineering, Surveying
Ayoroa Simmons specializes in providing Building Information Modeling (BIM) and Virtual Design and Construction (VDC) services to the Architecture, Engineering, Construction and Owner (AECO) industry. Our team of qualified professionals has a proven track record in all phases of project delivery including planning, design and construction. Our integrated surveying, design, and delivery approach reduces costs, improves schedule and enhances coordination during design and construction. Our services include high definition surveying, 3D laser scanning, architectural design and coordination, MEP design and coordination, BIM management, BIM coordination, BIM execution planning, design coordination, 3D modeling, CAD drafting, Shop drawing development, as-built drawings, measured drawings, process equipment design coordination and more.

Barry Wehmiller Design Group Inc

Arizona • California • Colorado • Florida • Georgia • Illinois • Missouri • New Jersey • New York • North Carolina • Oregon • South Carolina • Texas • Utah • Washington
Consultant
Industrial and Energy
Electrical, Electrical Design and Engineering, Elevator Equipment and Controls, Instrumentation and Control For Electrical Systems, Integrated Automation Sensors and Transmitters, Integrated Automation Software, Integrated Automation Systems For Conveying Equipment, Integrated Automation Systems For HVAC, Integrated System Commissioning, Project Management and Coordination
Consulting Engineering company including facilities design mechanical and automation control system integration support services.
Company Logo

Guidon Design

Alabama • Florida • Georgia • Illinois • Indiana • Kentucky • Michigan • Mississippi • North Carolina • Ohio • Pennsylvania • South Carolina • Tennessee • Virginia • West Virginia
Architect, Consultant, Engineer
Healthcare, Infrastructure, Institutional
Architectural Design and Engineering, Building Information Modeling Bim, Civil Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Existing Conditions Assessment, Interior Design, Mechanical Design and Engineering, Project Management and Coordination, Structural Design and Engineering
Guidon is a healthcare-focused Service-Disabled Veteran Owned Small Business (SDVOSB) with 68+ professional Architects + Engineers. The Guidon name symbolizes history, performance, quality, and a badge of leadership. To us, true leadership is the willingness to accept risk, embrace challenges, and bravely charge ahead for the greater good of all. Over 70% of our planning and design work is in the healthcare sector.
Company Logo

POWER Engineers

Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • District of Columbia • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin
Engineer
Commercial, Industrial and Energy, Infrastructure, Institutional
Architectural Design and Engineering, Bim and Model Making Services, Civil Design and Engineering, Design and Engineering, Mechanical Design and Engineering, Structural Design and Engineering
POWER Engineers is a Engineer that serves the San Diego, CA area and specializes in Structural Design and Engineering, Design and Engineering, Civil Design and Engineering, BIM and Model Making Services, Architectural Design and Engineering, Mechanical Design and Engineering.
Company Logo

Vector Security

DC, DC • Ontario, CA • Delaware • Florida • Georgia • Kentucky • Louisiana • Maryland • Massachusetts • New Hampshire • New York • North Carolina • Ohio • Pennsylvania • South Carolina • Tennessee • Texas • Virginia
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Access Control, Access Doors and Panels, Communications, Electronic Security, Fire Suppression, Instrumentation and Control For Fire Suppression System, Integrated Automation Control and Monitoring Network, Integrated Automation Local Control Units, Integrated Automation Network Devices, Integrated Automation Systems For Electronic Safety, Integrated Automation Systems For Electronic Security, Integrated Automation Systems For Facility Equipment, Integrated Automation Systems For Fire Suppression, Integrated Automation Systems For HVAC, Integrated Automation Systems For Network Equipment, Integrated Automation Systems For Plumbing, Mass Notification, Safety Specialties, Screening Devices, Security Detection Alarm and Monitoring, Security Equipment, Technology Design and Engineering, Temporary Security, Video Monitoring and Documentation, Video Surveillance
Vector Security is your custom security, network and automation solution provider with over 400,000 company's and homes throughout North and Central America protected and served daily. We serve many of the Fortune 100 companys to supporting partners in new construction. We have a solution for you.
Company Logo

BIM Designs, Inc

DC, DC • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Architectural Design and Engineering, Bim and Model Making Services, Building Information Modeling Bim, Civil Design and Engineering, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Mechanical Design and Engineering, Structural Design and Engineering, Technology Design and Engineering
BIM Designs, Inc. is a 100% minority-owned, union-signatory, US-based construction and Building Information Modeling (BIM) services provider. Since 2016, we have been providing high-quality BIM detailing, deliverables, coordination, schedule, and project controls consulting services for over 125 projects to 75+ construction companies working on large commercial projects in the areas of: semiconductors, biotech/pharmaceutical, education, hospitality, healthcare, entertainment, and mixed-use residential and commercial buildings. And, we NEVER outsource our detailing work to offshore labor.
Company Logo

ZEPLUG USA LLC

Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Architect, Engineer, General Contractor, Specialty Contractor, Supplier
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Assessments and Studies, Communications, Electrical, Electrical Design and Engineering, Information Management and Presentation, Instrumentation and Control For Electrical Systems, Integrated Automation Local Control Units, Integrated Automation Network Devices, Integrated Automation Network Gateways, Integrated Automation Power Meters, Integrated Automation Systems For Electrical, Job Site Data Collection and Reporting, Project Management and Coordination, Value Analysis Engineering, Vehicle and Pedestrian Equipment, Vehicle Fare Collection
EVSE for free to you.
Company Logo

Creatum Solar LLC

Houston, TX • Alabama • Arizona • Arkansas • Colorado • Florida • Georgia • Louisiana • Mississippi • New Mexico • North Carolina • Oklahoma • South Carolina • Tennessee • Texas
General Contractor
Commercial, Industrial and Energy
Access Control, Electrical, Electrical General, Electrical Power Generation, Electrical Utilities High and Medium Voltage Distribution, Facility Electrical Power Generating and Storing Equipment, Instrumentation and Control For Electrical Systems, Instrumentation and Control For Fire Suppression System, Instrumentation and Control For HVAC, Integrated Automation Battery Monitors, Integrated Automation Lighting Relays, Integrated Automation Power Meters, Integrated Automation Sensors and Transmitters, Integrated Automation Systems For Electrical, Integrated Automation Systems For Fire Suppression, Integrated Automation Systems For HVAC, Integrated System Commissioning, Project Management, Project Management and Coordination
Creatum Solar has been producing residential and commercial quality power systems and solar installations saving people thousands of dollars. We have a team of dedicated installers ready for any challenge. We have extensive experience in solar and wind systems, battery storage, EV charging stations and backup generators, and we are dedicated to our customers to get them the best service.
Company Logo

UTD Technology Corp.

Georgia • North Carolina • South Carolina • Virginia
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Audio Video Communications, Communications, Data and Voice Communications, Integrated Automation Network Devices, Integrated Automation Systems For Communications, Integrated Automation Systems For Network Equipment, Technology Design and Engineering, Telephone Specialties
At UTD Technology, we strive to provide the latest and most trusted commercial technology systems for your business. Our company specializes in network design, structured wiring, surveillance systems, and digital signage. Digital Signage Let UTD Technology assist your business in creating digital signage to reach your target market in a digitally driven world. Designing signs for informational and interactive purposes, including educational facilities, digital menu boards, and other display signs. Network Design We bring reliable communications to your company’s doorstep. At UTD Technology, we specialize in the design and execution of business computer network infrastructure, delivering a safer and more secure network to your business. Structured Wiring UTD Technology offers both copper data cabling and fiber optic cabling systems, providing faster and more secure communication signal transmitting for your business’s telephone communication needs. Surveillance We produce quality peace of mind for your business through UTD Technology’s analog and digital security surveillance systems. Record with a state-of-the-art analog CCTV or digital (IP) CCTV camera system to suit your security requirements.
Company Logo

Thriven Design

Arkansas • California • Connecticut • Delaware • Florida • Georgia • Indiana • Iowa • Maryland • Massachusetts • Missouri • New Jersey • New York • North Carolina • Ohio • Pennsylvania • Tennessee • Texas • Virginia
Architect
Commercial, Residential
Architectural Design and Engineering, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Interior Design, Mechanical Design and Engineering, Project Management and Coordination
Thriven Design is a Architect that serves the Collingswood, NJ area and specializes in Interior Design, Electrical Design and Engineering, Design and Engineering, Project Management and Coordination, Design Coordination Services, Architectural Design and Engineering, Mechanical Design and Engineering.

AME DESIGN GROUP

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • District of Columbia • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia
Engineer
Commercial, Healthcare, Industrial and Energy, Institutional, Residential
Electrical Design and Engineering, Mechanical Design and Engineering
AME DESIGN GROUP is a Engineer that serves the Irvine, CA area and specializes in Electrical Design and Engineering, Mechanical Design and Engineering.
Company Logo

QSPEC Solutions, Inc.

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer, Specialty Contractor
Healthcare, Industrial and Energy, Infrastructure, Institutional
Design and Engineering, Industry Specific Manufacturing Equipment, Instrumentation and Control For Process Systems, Integrated Automation Control and Monitoring Network, Integrated Automation Sensors and Transmitters, Integrated Automation Software, Processed Water Systems
QSPEC Solutions provides a variety of technical services to a variety of companies by identifying control strategies, designing controls systems, implementing controls and assisting in the commissioning of these systems. Systems can be as simple as a single machine and as complex as an enterprise-wide automation strategy. We offer assistance in all phases of a project - including conceptual design, cost justification, system design, implementation, commissioning, and system enhancements. QSPEC Solutions is located in the metropolitan Kansas City area, from which we serve businesses throughout North America. We can assist you with any automation project your company is considering.

Martarano Engineering Inc

Connecticut • Delaware • Maryland • New Jersey • New York • North Carolina • Ohio • Pennsylvania • Virginia
Engineer
Commercial, Healthcare, Industrial and Energy, Institutional
Design and Engineering, Electrical Design and Engineering, Mechanical Design and Engineering
Our customers define what distinguishes us from other MEP firms. They appreciate our understanding of not only their engineering needs, but also an appreciation for their current business and industry concerns. We strive to understand their business challenges so we can provide the appropriate solution that will provide the largest impact at the lowest possible cost. Our values establish the need to listen closely to customers in order to fully understand the challenges of their businesses before we arrive at a solution. In this way we have earned to be many of our customer’s trusted advisor.
Company Logo

Schmidt Consulting Group

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Audio Video Communications, Building Information Modeling Bim, Commissioning, Communications, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Fire Protection Engineering, Mechanical Design and Engineering, Project Management and Coordination, Structural Design and Engineering, Technology Design and Engineering
Schmidt Consulting Group is a Engineer that serves the Pensacola, FL area and specializes in Structural Design and Engineering, Commissioning, Electrical Design and Engineering, Design and Engineering, Project Management and Coordination, Fire Protection Engineering, Design Coordination Services, Technology Design and Engineering, Building Information Modeling BIM, Audio Video Communications, Communications, Mechanical Design and Engineering.

Electrical Equipment Co

North Carolina • South Carolina • Virginia
Supplier
Industrial and Energy, Infrastructure
Electrical, Electrical General, Electrical Utilities High and Medium Voltage Distribution, Industry Specific Manufacturing Equipment, Instrumentation and Control For Electrical Systems, Instrumentation and Control For Process Systems, Integrated Automation Current Sensors, Integrated Automation Systems For Electrical, Integrated Automation Systems For Facility Equipment, Integrated Automation Ups Monitors
We are an electrical distributor with 13 locations throughout VA, NC and SC specialized in servicing industrial customers
Company Logo

Ampirical

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wyoming
Engineer, Specialty Contractor
Industrial and Energy
Caissons, Civil Design and Engineering, Design and Engineering, Electrical, Electrical Design and Engineering, Electrical Utilities High and Medium Voltage Distribution, Structural Design and Engineering
Ampirical (formed by employees of Entergy Operations Service, Inc. a wholly owned subsidiary of the Independent Operating Utility - Entergy Corporation) is a specialty design and design build (EPC) firm with Professional Engineering Licensure in practically every US State primarily specializing in high voltage electrical substations, and transmission/distribution lines (OH & UG) providing: • Electrical/civil/structural engineering • Procurement/logistics • Project/construction management • Construction • Commissioning
Company Logo

High Point Networks

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional
Communications, Detention Security Systems, Electronic Security, Information Management and Presentation, Information Specialties, Security Detection Alarm and Monitoring, Technology Design and Engineering, Video Surveillance
High Point Networks provides business IT solutions for organizations of all sizes. Our solutions include network infrastructure, communications, data center services, cybersecurity, and more.
Company Logo

BOLT Kitchens

DC, DC • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • District of Columbia • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin
Owner Real Estate Developer
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
3d Capture Scanning, Building Information Modeling Bim, Building Modules and Components, Civil Design and Engineering, Electrical Design and Engineering, Electrical Utilities High and Medium Voltage Distribution, General Construction Management, Integrated Automation Control and Monitoring Network, Mechanical Design and Engineering, Plumbing, Plumbing Utilities Distribution, Project Management, Project Management and Coordination, Structural Design and Engineering
Commercial Kitchen Design and Construction Management
Company Logo

A-SQUARED LLC

New Jersey • New York • North Carolina
Architect
Commercial, Healthcare, Institutional, Residential
Architectural Design and Engineering, Interior Design
A-SQUARED LLC is a Architect that serves the Union City, NJ area and specializes in Interior Design, Architectural Design and Engineering.
Company Logo

G2 Consulting Engineers

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer
Commercial, Healthcare, Institutional
Commissioning, Electrical Design and Engineering, Mechanical Design and Engineering
G2 Consulting Engineers is a Engineer that serves the Timnath, CO area and specializes in Commissioning, Electrical Design and Engineering, Mechanical Design and Engineering.
Company Logo

United Material Handling Inc.

Alaska • Arizona • California • Georgia • Idaho • Illinois • Indiana • Kentucky • Louisiana • Michigan • Nevada • New Jersey • New York • North Carolina • North Dakota • Oklahoma • Oregon • Pennsylvania • South Carolina • Tennessee • Texas • Utah • Washington
Specialty Contractor
Industrial and Energy
Integrated Automation Systems For Conveying Equipment
United Material Handling Inc. is a Specialty Contractor that serves the Moreno Valley, CA area and specializes in Integrated Automation Systems For Conveying Equipment.
Company Logo

SPG Planners + Engineers

Athens, GA • Hartwell, GA • Alabama • Florida • Georgia • North Carolina • South Carolina
Engineer
Commercial, Institutional, Residential
Civil Design and Engineering, Design and Engineering, Landscape Design and Engineering, Surveying
F
Company Logo

NATIONAL MEDIA SYSTEMS

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial, Residential
Audio Video Communications, Communications, Design and Engineering, Electronic Security, Entertainment and Recreation Equipment, Integrated Automation Network Devices, Integrated Automation Network Gateways, Integrated Automation Systems For Communications, Integrated Automation Systems For Network Equipment, Project Management and Coordination, Residential Equipment, Security Detection Alarm and Monitoring, Security Equipment, Technology Design and Engineering, Video Surveillance, Window Treatments
National Media Systems provides End-to-End Design, Procurement, Installation and Technical Support for Network (WAN/LAN), Audio, Video, CCTV, Lighting Control, and Window Treatment Automation solutions for Commercial and Residential clients across the United States.

Commercial Systems Plus, Inc

Florida • Georgia • North Carolina • South Carolina
Specialty Contractor
Commercial
Air Barriers, Cement Plastering, Coastal Construction, Direct Applied Finish Systems, Exterior Insulation and Finish Systems Eifs, Exterior Specialties, Fiber Cement Siding, Fluid Applied Membrane Air Barriers, Fluid Applied Waterproofing, Polymer Based Exterior Insulation and Finish System, Polymer Modified Exterior Insulation and Finish System
Commercial Systems Plus, Inc is a Specialty Contractor that serves the Myrtle Beach, SC area and specializes in Coastal Construction, Cement Plastering, Fiber Cement Siding, Exterior Insulation and Finish Systems Eifs, Polymer Modified Exterior Insulation and Finish System, Fluid Applied Membrane Air Barriers, Direct Applied Finish Systems, Exterior Specialties, Fluid Applied Waterproofing, Air Barriers, Polymer Based Exterior Insulation and Finish System.
Company Logo

PS&S Architecture and Engineering

New Jersey • New York • North Carolina • Pennsylvania • Texas
Architect, Engineer
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Architectural Design and Engineering, Design and Engineering, Interior Design
PS&S Architecture and Engineering is a Architect, Engineer that serves the Cherry Hill, NJ area and specializes in Interior Design, Design and Engineering, Architectural Design and Engineering.

The Biber Partnership AIA

Connecticut • Maine • New Hampshire • New Jersey • New York • North Carolina • Pennsylvania
Architect
Commercial, Institutional, Residential
Architectural Design and Engineering, Design and Engineering, Interior Design
The Biber Partnership AIA is a full service, regional architecture, planning and interior design firm located in Summit, NJ. We specialize in commercial buildings and renovations, including buildings for community, workplace, education, recreation, dining, and many more.
Company Logo

Federal Hill Group

Connecticut • Florida • Massachusetts • New Hampshire • North Carolina • Ohio • Pennsylvania • Rhode Island
Architect
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Architectural Design and Engineering, Design and Engineering, Interior Design
Federal Hill Group is a Architect that serves the Providence, RI area and specializes in Interior Design, Design and Engineering, Architectural Design and Engineering.
Company Logo

Wd&a

District of Columbia • North Carolina • Virginia
Architect
Commercial, Healthcare, Residential
Architectural Design and Engineering, Design and Engineering, Interior Design
Wd&a is a Architect that serves the Virginia Beach, VA area and specializes in Interior Design, Design and Engineering, Architectural Design and Engineering.
Company Logo

Enterprise Controls Group LLC

Ontario, CA • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer
Commercial, Healthcare, Industrial and Energy, Institutional
Heating Ventilating and Air Conditioning HVAC, Instrumentation and Control For Electrical Systems, Instrumentation and Control For HVAC, Integrated Automation Control Dampers, Integrated Automation Control Valves
Enterprise Controls Group LLC is a Engineer that serves the Lebanon, TN area and specializes in Integrated Automation Control Dampers, Instrumentation and Control For Electrical Systems, Heating Ventilating and Air Conditioning HVAC, Integrated Automation Control Valves, Instrumentation and Control For HVAC.
Company Logo

ProjectReady

DC, DC • Alabama • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Construction Software Solutions, Information Management and Presentation, Integrated Automation Software, Project Management, Project Management and Coordination
From bid to closeout, ProjectReady's collaborative project information management solution facilitates connection, communication, and collaboration across all AEC team members, owners, and stakeholders on a project. ProjectReady's integrated data environment (IDE) brings people, platforms, and processes together and facilitates governed access to information to deliver project information that can be trusted to be accurate and complete. ProjectReady reduces rework, errors, and risk to help the entire AECO achieve greater profitability.
Company Logo

Kurv Architecture D.P.C.

Washington, DC • Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Architect, Consultant, Engineer, Owner Real Estate Developer
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Architectural Design and Engineering, Art, Design and Engineering, Design Coordination Services, Electrical Design and Engineering, Environmental Assessment, Existing Conditions Assessment, Furniture, Interior Design, Photography, Structural Design and Engineering
KURV ARCHITECTURE D.P.C. is a New York City based architecture, urban planning, design and development firm. We are a unique multidisciplinary team that combines award winning DESIGN methodology and state of the art ARCHITECTURAL design technology in order to improve upon the products of BUILDINGS, SITES, STRUCTURES and SPACE. Whether erected ground up as new buildings, rehabilitated, renovated, retrofitted, re-made sustainable, PASSIVHAUS, or otherwise re-imagined or re-developed by the ART of adding value by DESIGN to the end RESULT of a building project. We are foremost an ARCHITECTURE firm, specializing in knowing where to add tangible, intrinsic VALUE to a project through the implementation of unique award winning DESIGN. The word DESIGN is used in the broadest sense to describe the full scope of a project’s development process. Therefore, we work at all scales and stages of the process to ensure that increased value is always returned as a direct result of our involvement. Our architectural SERVICES include feasibility studies, zoning and land use analysis, bulk envelope massing calculations and visualizations, landmarks + preservation committee applications, board of standards and appeals (bsa) variance proposals, planning and zoning board presentations, ULURP applications, parametric modeling of building pro forma, energy modeling and design, computational design, advanced architecture and interior design, full project design development, construction documents, construction administration and project coordination. We also provide general consulting services, owner’s side project management representation, and technical consulting as well as nyc dob special project progress inspections. Whether we have skin in the game as partners or are acting solely as consultants, or just creating and building for ourselves, we work hard to make sure that added VALUE of our CREATIVE design experience shows through to the end result in every detail of a project. Our company's role and mission is to apply our collective knowledge and experience of the worlds of real property, buildings, ARCHITECTURE, structures, interiors, building systems, and construction in addition to the world of industrial DESIGN, industrial manufacturing, production, and digital technology onto NEW ideas and experiences for better buildings, better development projects and ultimately a better built world. Simply put, we provide a smarter built world by leveraging our unique DESIGN knowledge, our industry contacts and accumulated first hand experience. We are unique in our multidisciplinary approach because we design, model and oversee the production of the entirety of a building's integrated components, from the foundations and superstructure to the art that hangs on the wall, integrating everything else in-between; kitchens, lighting, plumbing, flooring, textiles, ceramics, electronics, millwork, materials and HVAC. No other design - development studio in the world can bring this broad spectrum of approach to detail into the world of buildings in such an wholistic way. We've all heard that a good BUILDING or SPACE is more than a sum of its individual parts. WE are what happens when everything from the development process itself down to the door handles you touch are individually well designed parts collectively working together for bigger picture results. KURV Architecture’s built projects have established a reputation for increased intrinsic value with better SPACES, BUILDINGS and PROJECT RESULTS that positively affect everyone involved, from the clients, developers and partners who initiate the projects, the tradesmen, contractors and vendors who build and construct, to the new owners, tenants, end users and the surrounding communities who DWELL within and where these projects are BUILT. We add value by applying better DESIGN for the benefit of everyone involved in a building’s lifecycle.
Company Logo

BCT Design Group

Delaware • District of Columbia • Maryland • New Jersey • New York • North Carolina • Pennsylvania • Virginia
Architect
Commercial, Healthcare, Residential
Architectural Design and Engineering, Interior Design, Project Management and Coordination
BCT Design Group is a Architect that serves the Baltimore, MD area and specializes in Interior Design, Project Management and Coordination, Architectural Design and Engineering.
Company Logo

Keaton Interiors

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Architect
Commercial, Residential
Architectural Design and Engineering, Furnishings, Interior Design
Interior Design firm specializing in multifamily, residential and restaurants.
Company Logo

BASE

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Hawaii • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Engineer
Commercial, Healthcare, Institutional, Residential
Structural Design and Engineering
BASE is a full-service structural engineering consulting firm with offices in Hawaii, Chicago, Guam, and Florida. BASE is internationally recognized for a wide variety of high-quality projects and has provided award-winning structural design services for projects worldwide. A small business concern, BASE has the resume of larger firms yet provides the personalized service common in smaller firms. The number of successful design-build and value engineering projects, and most importantly the resultant savings to clients in cost and schedule, are indicative of BASE's attention to economy and constructability. BASE is also experienced in dealing with regional issues including: corrosive tropical environments, high humidity, hurricane/typhoon winds and seismically-active regions.
Company Logo

Pinnacle Engineering, Inc.

Alabama • Arizona • Arkansas • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Montana • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Consultant, Engineer
Commercial, Healthcare, Infrastructure, Institutional, Residential
Structural Design and Engineering
We provide structural engineering services.

Axcess Industries, Inc.

Alabama • Alaska • Arizona • Arkansas • California • Colorado • Connecticut • Delaware • Florida • Georgia • Idaho • Illinois • Indiana • Iowa • Kansas • Kentucky • Louisiana • Maine • Maryland • Massachusetts • Michigan • Minnesota • Mississippi • Missouri • Nebraska • Nevada • New Hampshire • New Jersey • New Mexico • New York • North Carolina • North Dakota • Ohio • Oklahoma • Oregon • Pennsylvania • Rhode Island • South Carolina • South Dakota • Tennessee • Texas • Utah • Vermont • Virginia • Washington • West Virginia • Wisconsin • Wyoming
Specialty Contractor
Commercial, Healthcare, Industrial and Energy, Infrastructure, Institutional, Residential
Bulk Material Processing Equipment, Chemical Waste Systems, Commercial Equipment, Commissioning, Data and Voice Communications, Electrical, Electrical General, Electrical Utilities High and Medium Voltage Distribution, Facility Electrical Power Generating and Storing Equipment, Facility Maintenance and Operation Equipment, Fire Extinguishing Systems, Fire Protection Specialties, Fire Pumps, Fire Suppression, Grouting, Industry Specific Manufacturing Equipment, Instrumentation and Control For Electrical Systems, Instrumentation and Control For Plumbing, Instrumentation and Control For Process Systems, Integrated Automation Actuators and Operators, Integrated Automation Control Valves, Integrated Automation Current Sensors, Integrated Automation Sensors and Transmitters, Integrated Automation Systems For Conveying Equipment, Integrated Automation Systems For Electrical, Integrated Automation Systems For Electronic Safety, Integrated Automation Systems For Facility Equipment, Integrated Automation Systems For Plumbing, Liquid Fuel Process Piping, Liquid Polymer Piping, Louvers, Material Lifts, Plumbing, Process Heating Cooling and Drying Equipment, Process Piping, Processed Water Systems, Steam Process Piping, Temporary Electricity, Vents, Welding and Cutting Gases Piping
We perform both Mechanical and Electrical Services throughout the US.

1-40 of 3,452 contractors

Browse Contractors in Stem, North Carolina by Trade

Design and Engineering

Project Management

Demolition

Earthwork

Landscaping

Concrete

Masonry

Structural Steel

Electrical

Flooring

Frequently Asked Questions

How many Design and Engineering contractors in Stem, NC are on the Procore Construction Network?

There are currently 3,452 Design and Engineering contractors in Stem, NC on the Procore Construction Network.

How can I find and connect with Design and Engineering contractors in Stem, NC?

The Procore Construction Network allows you to search for Design and Engineering contractors in Stem, NC that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Design and Engineering contractors in Stem, NC join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Design and Engineering contractors in Stem, NC cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Design and Engineering contractors in Stem, NC on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.

How many Design and Engineering contractors in Stem, NC are on the Procore Construction Network?

There are currently 3,452 Design and Engineering contractors in Stem, NC on the Procore Construction Network.

How can I find and connect with Design and Engineering contractors in Stem, NC?

The Procore Construction Network allows you to search for Design and Engineering contractors in Stem, NC that meet your business needs. Most companies provide a phone number or website on their business page so you can easily connect with them.

How can Design and Engineering contractors in Stem, NC join the Procore Construction Network?

The Procore Construction Network is free and open to any businesses in the construction industry. Click Sign Up at the top of this page to submit your information and create your business page.

How do I know what areas Design and Engineering contractors in Stem, NC cover?

Most businesses listed on the Procore Construction Network have updated their service area. Select a business to view a service area map and find what other areas they work in.

How do I invite Design and Engineering contractors in Stem, NC on the Procore Construction Network to bid on projects?

The Procore platform offers a Bidding tool to Procore customers. If your company uses our Bidding solution, you can search and invite businesses on the Procore Construction Network directly from the Bidding tool. Not yet using Procore? Request a demo.